NordicTrack NTL19011.1 User Manual page 12

7. Remove the four 3/8" x 1" Screws (2) from the
Uprights (89, 90).
Orient each Handrail Bracket (85) so that the
long tab is in the position shown and the large
holes are on top. Route the Upright Wire (84)
through the center hole in a Handrail Bracket.
Attach each Handrail Bracket (85) with the two
3/8" x 1" Screws (2) and two 3/8" Star Washers
(12). Start all four Screws, and then tighten
them.
8. With the help of a second person, hold the hand-
rail assembly near the Left Upright (89).
Connect the Upright Wire (84) to the Handrail
Wire (86). See the inset drawing. The connec-
tors should slide together easily and snap
into place. If they do not, turn one connector
and try again. IF YOU DO NOT CONNECT THE
CONNECTORS PROPERLY, THE CONSOLE
MAY BECOME DAMAGED WHEN YOU TURN
ON THE POWER. Then, remove the wire tie
from the Upright Wire.
7
2
Long
Tab
12
84
89
8
86
84
12
2
Long
Tab
12
Large
Holes
90
85
Handrail
Assembly
86
84
Wire
Tie
89
85