Standard Keypad; Premium Keypad - ADT BHS-4000A User Manual

Standard Keypad

7. If the READY light does not
turn on, see the Frequently
Asked Questions at
www.MyADT.com, or
call Customer Care at
800.445.0872 for further
assistance in correcting the
not-ready condition.
8. To turn the system on, you
must first turn off the zone that
is not ready to arm. Press the
OPTIONS key.
9. Press the 1 key.
BYPASS
10. Enter the number of the
not-ready zone, which is the
number of the illuminated
light you observed in step 3.
ZONE
NUMBER
CAUTION: If you bypass a
zone, it will not be protected.
The keypad beeps. The READY
and BYPASS lights turn on.
11. Turn the system on.

Premium Keypad

5. If the message window
reads NOT READY,
see the Frequently
Asked Questions at
www.MyADT.com, or
call Customer Care at
800.445.0872 for further
assistance in correcting
the not-ready condition.
6. To turn the system on, you
must first turn off the zone
that is not ready to arm.
Press the OPTIONS key until
the message window reads:
BYPASS, ENTER ZONE #.
7. Enter the number of the not-
ready zone, which is the same
number that appeared in the
message window.
ZONE
NUMBER CAUTION: If you bypass a
zone, it will not be protected.
The keypad beeps. The
message window reads
READY, BYPASS, and the
number of the bypassed zone
is momentarily displayed.
8. Turn the system on.
17