The Emergency Keypad Panic Alarms - ADT Safewatch Plus Enterpreneur Security Systems User Manual

THE EMERGENCY KEYPAD PANIC ALARMS

Your system may have been purchased with up to three emergency keypad panic
alarms. These may be used to activate an alarm in the event of a Fire, Hold-up, or
other emergency condition, as programmed by your installer. Each alarm is
activated by pressing the appropriate emergency panic key (located below the
numeric keys). Each alarm may be audible or silent. It may also be programmed
to report the condition to
resentative to determine the characteristics of your system.
Each of the three emergency panic keys (from left to right: A, B, and C) can initiate
a specific type of alarm as programmed and labeled by your installer.
To activate an Emergency Alarm:
1. Press the appropriate emergency panic key. The Emergency Alarm will
activate.
NOTE: Your
for three seconds (or pressing at least twice within three sec-
onds). Checkwlthyoutsecurttyrepresentatlveforthespeclflccharacter-
your system
When an Emergency Alarm is activated, the ALARM indicator will be lighted
(unless your installer has programmed the alarm for silent or no control station in-
dication). To reset the alann:
1. Enter your User Code. Pressing the " * " key will extinguish the ALARM
indicator, if lighted.
if desired. (See "Special Features").
a
central monitoring station. Check with your security rep-
7