Fisher & Paykel ActiveSmart E402B Installation Instructions And User Manual page 7

Cleaning
Many commercially available cleaning products contain solvents
■ ■
which may attack plastic components of your refrigerator and
cause them to crack. Please refer to the cleaning care section of this
booklet for further advice.
Electrical
This appliance must be installed in accordance with the installation
■ ■
instructions before use.
Never unplug your refrigerator by pulling on the power cord.
■ ■
Always grip the plug firmly and pull straight out from the outlet.
■ ■
Do not plug in any other appliance at the same power point as your
■ ■
refrigerator or use extension cords or double adapters.
Repair or replace immediately all electric service cords that have
■ ■
become frayed or otherwise damaged. Do not use a cord that
shows cracks or abrasion along its length or at either the plug or
appliance end.
If the power supply cord is damaged, it must only be replaced by
■ ■
your Fisher & Paykel Authorised Repairer because special purpose
tools are required.
When moving your appliance away from the wall, be careful not to
■ ■
roll over or damage the power cord.
Do not use electrical appliances inside the food storage
■ ■
compartments of the appliance.
Important!
Your refrigerator is designed to operate for many years without
the need for service checks. However, if your refrigerator is
malfunctioning, have it attended to by your Fisher & Paykel
Authorised Repairer as soon as possible. All electrical repairs must
be carried out by an adequately trained service technician or
qualified electrician.
Safety and warnings
5