Table of Contents
Advertisement
SCP Card Technical Specifications
Table 5. SCP Card Technical Specifications (1 of 2)
16
Specifications
Size
Weight
Approvals
Safety Certifications
Power
Power Dissipation
Physical Environment
Operating temperature
Storage temperature
Relative humidity
Shock and vibration
DS3 Uplink Specifications
Number of ports
Connector Type
Standards Supported
Frame Formats
Line Type
Data Rates Supported
October 2003
Criteria
Length: 10.4 inches (26.42 cm)
Height: 11.15 inches (28.32 cm)
Width: 1.0 inches (2.54 cm)
Approximately 1.7 lbs. (0.76 kg)
Refer to the equipment's label for approvals on product.
The SCP card contains a DC-to-DC converter that requires
48V power input. The 48V power is distributed through the
Hotwire chassis backplane.
DS3: 32 watts
OC3: 29 watts
IMA: 32 watts
32° to 140° F (0° to 60° C)
–4° F to 158° F (–20° C to 70° C)
5% to 85% (noncondensing)
Withstands normal shipping and handling.
1 DS3
Two 75-ohm BNC jacks
Operations, violations, alarm states, perrformance
statistics: ANSI T1.107-1995, ANSI T1.646-1995
Output jitter: ITU G.709, ITU G.783
DS3 electrical specifications: ITU G.709
DS3/ATM physical layer interface: ATM Forum
af-phy-0054.000
HEC generation, calculation, error detection: ANSI T1.646,
ITU T1.646
PLCP, Direct
B3ZS
44.736 Mbps
8400-A2-GZ40-10
Advertisement
Table of Contents
