Technical Specifications - Paradyne HotWire 8546 Installation Instructions Manual

Technical Specifications

Planning the DSL Card Installation
2
Specifications
Size
Weight
Approvals
Safety Certifications
Power
Physical Environment
Operating temperature
Storage temperature
Relative humidity
Shock and vibration
* Criteria of technical specifications are subject to change without notice.
Review the following list to help plan for the installation.
Obtain the applicable cables; refer to the next section, Cables You Need .
Make sure the HotWire DSLAM chassis is installed and power is supplied to
the chassis.
After the DSL card is installed, there are configuration instructions that must
be performed before you can begin to use the DSL cards for Internet or
Intranet connectivity. Refer to the HotWire DSLAM for 8540 and 8546 DSL
Cards User's Guide , Document No. 8000-A2-GB20, for more detailed
configuration procedures.
October 1997
Criteria*
10.4 inches (L) x 11.15 inches (H) x .8 inches (W)
Approx. 1.4 lbs.
Refer to the equipment's label for approvals on product.
The DSL card contains a DC-to-DC converter that
requires – 48V power input. The – 48V power is
distributed through the HotWire DSLAM backplane.
Maximum Power Dissipation = 18 watts
32 to 122 F (0 to 50 C)
– 4 F (–20 C) to 158 F (70 C)
5% to 85% (noncondensing)
Withstands normal shipping and handling.
8546-A2-GN10-20