Network - Planet Networking & Communication 2BIG NAS User Manual

System Configure system information, date & time, maintenance, and view
system log file.
Video Configure bit rate and frame rate of video profiles
User Setup user name, password and login privilege
E-Mail Setup E-Mail configuration
FTP This device is a client site and configure information to upload images to
server
Object detection Setup Object detection

3.5.1 Network

Use this menu to configure the network to connect the device and the clients.
This section provides the menu of connecting the device through Ethernet cable.
MAC address: Display the Ethernet MAC address of the device. Note that user cannot
change it.
Obtain an IP address automatically (DHCP): DHCP: Stands for Dynamic Host Configuration
Protocol. Enable this checked box when a DHCP server is installed on the network to issue IP
address assignment. With this setting, the IP address is assigned automatically. If this device
cannot get an IP address within limited tries, the device will assign a default IP address,
192.168.0.20, by itself as the default IP address.
IP address, Subnet mask, Gateway, 1st DNS, 2nd DNS server: If you do not select Obtain
an IP address automatically, then you need to enter these network parameters by yourself.
28/57