Maintenance - Marquis 660 Owner's Manual

WeeKlY maintenance
1. removing Debris
Remove any debris from the Vortex skimmer and suction guard(s) on
the inside of the spa. Blocked intakes can impede the flow of water
through the jetting system.
2. Water level
Replenish the water level if necessary so that it is approximately two-
thirds up the Vortex skimmer opening. (See STARTING YOUR SPA.)
montHlY maintenance
1. Filter care
We cannot stress enough the importance of a clean filter for proper
water filtration. Dirty filters can restrict water flow, cause hazy water,
and prevent your chemicals from working properly. Many water treat-
ment products clear or clarify the water by clumping microscopic
particles and minerals together so that these larger particles can be
effectively trapped in the filter. A filter clogged with debris and calcium
deposits does not trap particles properly.
The Maintenance Reminder on the control panel indicates a CL every
30 days to remind you to clean your filter.
eVerY tHree to Four montHs
Draining and Filling the spa
The average spa needs to be drained every three to four months. Af-
ter months of continually adding chemicals to the water and introducing
body oils and lotions, the water can be difficult to manage and chemicals
are not as effective as usual. You may also notice excessive foaming. A
maintenance reminder appears on the control panel as "CHNG WATR"
to remind you to change water. More frequent draining may be required
depending on use.
38

maintenance