Installation Instructions; Choose A Location; Remove Transit Bolts; Levelling - Hotpoint WMTL80 Instruction Manual

Hotpoint washing machine instructions for installation & use wmtl80

Table of Contents

Installation Instructions

IMPORTANT INFORMATION:

Do not plug in and switch appliance on at the mains until installation is complete.

You may be charged for a service call if a problem with your appliance is caused

by incorrect installation or misuse.

Follow these 5 steps for a trouble free installation:

1. Choose a Location...

The choice of location for your appliance will influence its performance.

Position where possible on a solid floor. Vibration may occur with a wooden floor.

Take care with vinyl floor coverings. The weight of the appliance may cause indentations in

some vinyl floor coverings.

You should not install your appliance on a carpeted floor, but if this is unavoidable, ensure

that air can circulate around its base.

If locating next to another appliance or an item of furniture, leave space between them to

allow air to circulate.

For your safety and to comply with IEE regulations, you should not install your appliance in a

bath or shower room. Seek professional advice if you wish to do so.

Ensure sufficient space is allowed for the appliance - minimum requirement for dimensions

(H) 850mm x (W) 400mm x (D) 600mm

Ensure the electrical socket and water taps are easily accessible and that the water

supply can be isolated if necessary.

Table of Contents