(1) Display the Maintenance screen.
See "Performing Maintenance" on page 94.
(2) Use [6] or [y] to select <Nozzle check> and then press [OK].
The pattern print confirmation screen is displayed.
11• • • •
0=-(2)
1!~~lill
Deep cleaning
1~~~ID~~g~!l.gID
Manua I head aIign
1~~I
• • •
~ .·!··.i·~IIf;I¥·
• • • • •
l liID~
(3) Use [6] or [y] to select <Yes> and then press [OK].
The nozzle check pattern is printed.
4
Examine the pattern and take the appropriate action.
See "Examining the Nozzle Check Pattern" on page
96.
•
Examining the Nozzle Check Pattern
Examine the nozzle check pattern. Perform cleaning if necessary.
W
Note
If the ink level is low, the nozzle check pattern is not printed correctly. Replace
the relevant ink tank. (See "Replacing an Ink Tank" on page 88.)
I
Y
I
I
DR
I
•
There are no white stripes.JAIl the patterns are printed normally.
(1) Select <All A> and press [OK].
The screen returns to the Maintenance screen.
96
Routine Maintenance
Chapter 10