Cannot Print Properly Through Wireless; Communication - Canon PIXMA MP500 User Manual

Erro.rMessageQnCamera
Hardware Error/No ink
Printer error
Ink tank errors have occurred. Replace the ink tank.
See "Replacing an Ink Tank" on page 88.
An error requiring servicing might have occurred.
Disconnect the cable between the machine and the camera, turn off the
machine, and unplug the power cord of the machine from the power
supply. After a while, plug the power cord of the machine back in, turn on
the machine, and then reconnect the camera to the machine. If the same
error occurs, contact the Canon Customer Care Center.
*1
To resume printing, you can press the [OK] on the machine instead of selecting Continue.
Cannot Print Properly through Wireless
Communication
The following are the causes of the trouble may occur when printing through infrared
communication.
For the trouble when printing through Bluetooth communication, refer to the Bluetooth User's Guide.
Cause Action
The installation place, distance, When printing through infrared communication, confirm that the infrared
and/or angle is improper. communication ports on both the machine and the mobile phone are placed
to face each other at the proper angle and distance, and that there is
nothing to block the communication between them, and then try printing
again. The proper distance and angle for communication vary depending
on the specifications of your mobile phone and computer and on external
environment. Place the machine within 7.87" / 20 cm from the mobile phone
for proper communication.
During infrared communication, If infrared communication between the infrared ports of the machine and
infrared rays were interrupted or the mobile phone is interrupted by any obstacle for ten and several
another infrared communication seconds or longer during printing, the paper on which data is being printed
device is operating nearby. is ejected and the machine is reset. Remove the obstacle and retry printing.
If an infrared communication device is operating nearby, interference can
occur and fail in printing the document to the end. While printing a
document through infrared communication, do not operate another infrared
communication device, such as a remote controller of a TV, nearby.
The version of the infrared The infrared communication function of the machine is only compatible
communication port being used is with mobile phones with IrDA compliant infrared communication ports.
not compatible with IrDA. Printing through infrared communication cannot be performed by any other
types of mobile phones.
Chapter 11 Troubleshooting 123