See "Turning on the Machine" on page 19.
2
Press [Menu].
3
Display the Maintenance screen.
(1) Use
[~]
or [..... ] to select <Maintenance/settings>, then press [OK].
The Maintenance/settings screen is displayed.
(1 )
(2) Use
[~]
or [.-. ] to select <Maintenance>, then press [OK].
The Maintenance screen is displayed.
l----(2)
(3) Use [a] or [y] to select the setting item, then press [OK].
The setting screen for the selected item is displayed.
Ij;I~~I!~III,r~II.·
• • • • • • • • • • · • • • • • · • • • • • • • • • • • • • • • • • • • • • • • • • • • · • • • • • • • • • •
· ··.··lr-(3)
•
Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the Print Head
nozzles and to verify Print Head alignment. Use this function when printed results are blurred or
the color is incorrect.
Ensure that the Inner Cover is closed.
1
2
3
W
Note
Press [ON/OFF] to turn on the machine, then load a sheet of A4 or Letter-sized
plain paper in the Auto Sheet Feeder or the Cassette.
See "Turning on the Machine" on page 19 and "Loading Paper" on page 21.
Use [Feed Switch] to select the paper source where you have loaded paper.
Printing the nozzle check pattern.
Chapter 10
Routine Maintenance
95