Quality Of Service - KTI Networks KGS-612F User Manual

4.12 Quality of Service

QoS Configuration
Port
802.1p
DSCP
Port Priority
[802.1p Mapping]
[DSCP Mapping]
[Service Policy]
[Apply]
[Refresh]
Note:
802.1p classification is superior over DSCP classification if both are enabled. That means if a
received packet is classified successfully in 802.1p classification, the classified priority class is
used directly for the packet and the result of DSCP classification is ignored.
Description
Port number
802.1p priority classification
Enable - set to enable this classification to the port for priority-tagged and
VLAN-tagged packets
Disable - 802.1p classification is not applied to the port
DSCP classification
Enable - set to enable DSCP classification to the port for IP packets
Disable - DSCP classification is not applied to the port
Port default priority class, it is used as a port-based QoS mode when
802.1p and DSCP classifications are disabled. It is also used as default
priority class for the received packet when both 802.1p and DSCP classifi-
cation failed in classification.
Class 3 ~ Class 0 - priority class
Click to configure 802.1p mapping tables.
Click to configure DSCP mapping table.
Click to configure per port egress service policy mode.
Click to apply the configuration change
Click to refresh current configuration
-48-