Lenovo V560 Hardware Maintenance Manual page 62

Lenovo V560/B560 Hardware Maintenance Manual
Figure 12. Removal steps of fan assembly and heat sink assembly (continued)
Lift the fan assembly and heat sink assembly in the direction shown by arrow
Be careful not to damage the connector.
Attention: Do not handle the heat sink assembly roughly. Improper handling
can cause distortion or deformation and imperfect contact with components.
When installing:
•
58
Before you attach the fan assembly to the computer, apply thermal grease,
at an amount of 0.2 grams, to the
too much or too less grease application can cause a thermal problem due
to imperfect contact with a component. In models with the discrete graphics
chip, there is an additional thermal rubber
a
b
c
part shown in the figure above. Either
a b
whose film to be peeled off.
c
.
3
3