Lenovo V560 Hardware Maintenance Manual page 36

Lenovo V560/B560 Hardware Maintenance Manual
32
Table 2. Status indicators
Indicator Meaning
White:
Drive in use
1
Note: Do not move the system while the white drive-in-use
light is on. Sudden physical shock could cause drive errors.
White:
Num lock
2
White:
Caps lock
3
White:
Scroll lock
4
Power on White:
5
Blinking white:
Off:
Battery status Blinking amber: (500ms off/1s on)
6
Blinking amber: (100ms off/3.2s on)
Amber:
Blinking white:
White:
Wireless status White:
7
Blinking white:
Flashing white:
Off:
Touchpad White:
8
Data is being read from or written to the hard disk
drive, or the optical disk drive. When this indicator
is on, do not put the computer into standby mode
or turn off the computer.
The separate numeric keypad on the keyboard is
enabled. To enable or disable the numeric keypad,
press the Num Lock key.
Caps Lock mode is enabled. You can enter all
alphabetic characters (A-Z) in uppercase without
pressing the Shift key. To enable or disable Caps
Lock mode, press the CapsLk key.
Scroll Lock mode is enabled. To enable or disable
Scroll Lock mode, press and hold the Fn key, and
press the Delete (ScrLk) key.
System is enabled.
System is in sleep mode.
System is in hibernate mode or shut down.
The remaining power of the battery is less than 5%
of its capacity.
The battery is being charged with the remaining
power between 5% and 20% of its capacity.
The computer is operating on battery power with
the remaining power between 5% and 20% of its
capacity.
The battery is being charged with the remaining
power between 20% and 80% of its capacity.
The remaining power of the battery is more than
80% of its capacity, or the computer is operating on
battery power with the remaining power between
20% and 80% of its capacity.
The wireless LAN radio is turned on and connected
to AP.
The wireless LAN is switched on and the radio of
it is also turned off, or the wireless LAN radio is
turned on and not connected to AP.
The wireless LAN radio is turned on and data is
being transmitted.
The wireless LAN is switched off and the radio of it
is also turned off.
The touchpad is disabled. To enable or disable the
touchpad, press and hold the Fn key, and press
the F6 key.