Lenovo V580 Hardware Maintenance Manual

Hide thumbs Also See for V580:
Table of Contents

Advertisement

Hardware Maintenance Manual
Lenovo V580 and V580c

Advertisement

Table of Contents
loading

Summary of Contents for Lenovo V580

  • Page 1 Hardware Maintenance Manual Lenovo V580 and V580c...
  • Page 2 Appendix A “Notices” on page 107. Third Edition (July 2012) © Copyright Lenovo 2012. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-35F-05925.
  • Page 3: Table Of Contents

    LCD FRUs ....Keyboard ....Chapter 5. Lenovo V580 and V580c . . 37 Miscellaneous parts .
  • Page 4 Hardware Maintenance Manual...
  • Page 5: About This Manual

    • The product-specific sections include service, reference, and product-specific parts information. Important: • This manual is intended only for trained service technicians who are familiar with Lenovo products. Use this manual to troubleshoot problems effectively. • Before servicing a Lenovo product, be sure to read all the information under Chapter 1 “Safety information”...
  • Page 6 Hardware Maintenance Manual...
  • Page 7: Chapter 1. Safety Information

    • Reinstall all covers correctly before returning the machine to the customer. • Fan louvers on the machine help to prevent overheating of internal components. Do not obstruct fan louvers or cover them with labels or stickers. © Copyright Lenovo 2012...
  • Page 8: Electrical Safety

    Electrical safety Observe the following rules when working on electrical equipment. Important: Use only approved tools and test equipment. Some hand tools have handles covered with a soft material that does not insulate you when working with live electrical currents. Many customers have, near their equipment, rubber floor mats that contain small conductive fibers to decrease electrostatic discharges.
  • Page 9: Safety Inspection Guide

    4. Check for cracked or bulging batteries. 5. Remove the cover. 6. Check for any obvious non-Lenovo alterations. Use good judgment as to the safety of any non-Lenovo alterations. 7. Check inside the unit for any obvious unsafe conditions, such as metal filings, contamination, water or other liquids, or signs of fire or smoke damage.
  • Page 10: Grounding Requirements

    2. Make sure that the ESD protective devices you use have been certified (ISO 9000) as fully effective. When handling ESD-sensitive parts: • Keep the parts in protective packages until they are inserted into the product. • Avoid contact with other people. •...
  • Page 11 DANGER DANGER DANGER DANGER DANGER Chapter 1 Safety information...
  • Page 12 DANGER Hardware Maintenance Manual...
  • Page 13 Chapter 1 Safety information...
  • Page 14 PERIGO PERIGO PERIGO PERIGO PERIGO PERIGO Hardware Maintenance Manual...
  • Page 15 PERIGO PERIGO DANGER DANGER DANGER Chapter 1 Safety information...
  • Page 16 DANGER DANGER DANGER DANGER DANGER VORSICHT Hardware Maintenance Manual...
  • Page 17 VORSICHT VORSICHT VORSICHT VORSICHT Chapter 1 Safety information...
  • Page 18 VORSICHT VORSICHT VORSICHT Hardware Maintenance Manual...
  • Page 19 Chapter 1 Safety information...
  • Page 20 Hardware Maintenance Manual...
  • Page 21 Chapter 1 Safety information...
  • Page 22 Hardware Maintenance Manual...
  • Page 23 Chapter 1 Safety information...
  • Page 24 Hardware Maintenance Manual...
  • Page 25: Laser Compliance Statement (Multilingual Translations)

    Laser compliance statement (multilingual translations) The laser compliance statements in this section are provided in the following languages: • English • Arabic • Brazilian Portuguese • French • German • Hebrew • Japanese • Korean • Spanish • Traditional Chinese Chapter 1 Safety information...
  • Page 26 Hardware Maintenance Manual...
  • Page 27 Chapter 1 Safety information...
  • Page 28 Hardware Maintenance Manual...
  • Page 29 Chapter 1 Safety information...
  • Page 30 Hardware Maintenance Manual...
  • Page 31 Chapter 1 Safety information...
  • Page 32 Hardware Maintenance Manual...
  • Page 33: Chapter 2. Important Service Information

    After a system board is replaced, ensure that the latest BIOS is installed to the system board before completing the service action. To download software fixes, drivers, and BIOS, do the following: 1. Go to http://www.lenovo.com/support. 2. Click Download Drivers & Software. The Web site offers three options to begin your search: • Search by product number •...
  • Page 34: Strategy For Replacing A Hard Disk Drive

    Note: RoHS and non-RoHS FRU part numbers with the same fit and function are identified by the unique FRU part numbers. Lenovo plans to transit to RoHS compliance before the implementation date and expects its suppliers to be ready to meet Lenovo’s requirements and schedule in the European Union. Products sold between 2005 and 2006 might contain some RoHS compliant FRUs.
  • Page 35: Chapter 3. General Checkout

    • Damage caused by liquid spilled into the system • Damage caused by the improper insertion of a PC Card or the installation of an incompatible card • Improper disc insertion or use of an optical drive © Copyright Lenovo 2012...
  • Page 36: Power System Checkout

    3. If the voltage is not correct, replace the ac power adapter. 4. If the voltage is acceptable, do the following: • Replace the system board. • If the problem persists, go to Chapter 5 “Lenovo V580 and V580c” on page 37. Hardware Maintenance Manual...
  • Page 37: Checking Operational Charging

    • Windows 7: Launch the Power Manager program and click the Battery tab. • Windows 8: – Press the recovery button to launch the Lenovo Solution Center program, and then click Battery. – Press Fn+Esc to launch the Lenovo Experience program, and then click Battery Health.
  • Page 38 Hardware Maintenance Manual...
  • Page 39: Chapter 4. Related Service Information

    For more information about the recovery solutions, refer to the help information system of the programs. Passwords As many as two passwords might be needed for a Lenovo notebook computer: the power-on password and the supervisor password. © Copyright Lenovo 2012...
  • Page 40: Power-On Password

    If any of these passwords has been set, a prompt for it will be displayed on the screen whenever the computer is turned on. The computer does not start until the password is entered. Note: If only a supervisor password is set, the password prompt will not be displayed when the operating system is started.
  • Page 41: Hibernation Mode

    Also, when the time set on the resume timer elapses, the computer automatically returns from sleep mode and resumes operation. Note: The computer does not accept any input immediately after it enters sleep mode. Wait a few seconds before taking any action to reenter operation mode. Hibernation mode In hibernation mode, the following occurs: •...
  • Page 42 Hardware Maintenance Manual...
  • Page 43: Chapter 5. Lenovo V580 And V580C

    • “Fn key combinations” on page 41 Specifications This topic lists the physical features for the Lenovo V580 and V580c models. Processor • Windows 7: To view the processor information of your computer, click Start, right-click Computer, and then click Properties.
  • Page 44: Status Indicators

    Wireless features • Integrated wireless LAN • Integrated WiMAX • 10/100/1000 Mbps Ethernet communication Security feature • Fingerprint reader Status indicators This topic presents the system status indicators that show the status of the computer. Status indicators (V580) Hardware Maintenance Manual...
  • Page 45 • Orange: The battery discharge level is between 5% and 20%. • Fast blinking orange: The battery charge or discharge level is 5% or less. • Off: The battery is detached or the computer is powered off. Chapter 5 Lenovo V580 and V580c...
  • Page 46 Status indicators (V580c) Table 2. Status indicators Indicator Meaning Caps Lock status White: Caps Lock mode is enabled. You can type all alphabetic characters (A-Z) in indicator uppercase directly. To enable or disable Caps Lock mode, press the Caps Lock key. Numeric Lock status White: The separate numeric keypad on the keyboard is enabled.
  • Page 47: Fn Key Combinations

    Fn+End Has the same function as the Break key on a conventional keyboard. Increases or decreases the display brightness level. Fn + up/down arrow Fn + left/right arrow Increases or decreases the sound volume. Chapter 5 Lenovo V580 and V580c...
  • Page 48 Hardware Maintenance Manual...
  • Page 49: Chapter 6. Fru Replacement Notices

    Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You can find a list of CRUs for your product in this Hardware Maintenance Manual. An electronic version of this manual can be found at http://www.lenovo.com/UserManuals.
  • Page 50 Notes: • Ensure that you use the correct screw. It is recommended to use new screws for replacements. If you have a torque screwdriver, tighten all screws firmly to the torque specified in the screw information table for each step. •...
  • Page 51: Chapter 7. Removing And Replacing A Fru

    Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You can find a list of CRUs for your product in this Hardware Maintenance Manual. An electronic version of this manual can be found at http://www.lenovo.com/UserManuals.
  • Page 52: 1010 Battery Pack

    1010 Battery pack Removal steps of battery pack DANGER Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode. Unlock the manual battery latch . Hold the right battery latch in the unlocked position, and then remove the battery pack When installing: Install the battery pack in the slot.
  • Page 53: 1030 Optical Drive Or Blank Bezel

    Removal steps of bottom slot cover Remove the screws , and then remove the cover Step Screw (quantity) Color Torque Black 1.85 kgf-cm M2 × 3 mm, flat-head, nylon-coated (2) 1030 Optical drive or blank bezel For access, remove these FRUs in order: •...
  • Page 54 Removal steps of optical drive bezel and optical drive bracket Remove the optical drive bezel in the direction shown by the arrow in the following illustrations. For Lenovo V580 models For Lenovo V580c models Hardware Maintenance Manual...
  • Page 55: 1040 Memory Modules

    Remove the screw(s) and then remove the optical drive bracket. For Lenovo V580 models Torque Step Screw (quantity) Color M2 × 3 mm, flat-head, nylon-coated (1) Black 1.85 kgf-cm For Lenovo V580c models Torque Step Screw (quantity) Color M2 × 3 mm, flat-head, nylon-coated (2) Black 1.85 kgf-cm...
  • Page 56: 1050 Hard Disk Drive Assembly

    Removal steps of memory modules Release the two latches on both edges of the socket at the same time in the direction shown by the arrows , and then unplug the memory module in the direction shown by the arrow When installing: Insert the notched end of the memory module into the socket.
  • Page 57: Step Screw (Quantity) M2 × 3 Mm, Flat-Head, Nylon-Coated

    Removal steps of hard disk drive assembly Remove the screw , then pull the tab in the direction shown by the arrow Step Screw (quantity) Color Torque Black M2 × 3 mm, flat-head, nylon-coated (1) 1.85 kgf-cm Remove the hard disk drive from the slot in the direction shown by the arrow When installing: Ensure that the hard disk drive connector is attached firmly.
  • Page 58: 1060 Pci Express Mini Card For Wireless Lan

    Removal steps of hard disk drive bracket Remove the screws Step Screw (quantity) Color Torque M3 × 4 mm, flat-head, nylon-coated (4) Black 4.0 kgf-cm Remove the hard disk drive bracket in the direction shown by the arrow 1060 PCI Express Mini Card for wireless LAN For access, remove these FRUs in order: •...
  • Page 59: Color Torque Black

    Removal steps of PCI Express Mini Card for wireless LAN In steps , unplug the connectors using the removal tool antenna RF connector (P/N: 08K7159) or pick the connectors with your fingers and gently unplug them in the direction of the arrows. Then remove the screw Step Screw (quantity) Color...
  • Page 60: 1070 Msata Solid-State Drive

    1070 mSATA solid-state drive For access, remove these FRUs in order: • “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 Attention: • Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper handling can cause damage and permanent loss of data.
  • Page 61: 1080 Backup Battery

    Remove the mSATA solid-state drive in the direction shown by the arrow 1080 Backup battery Removal steps of backup battery DANGER Use only the battery specified in the parts list for your computer. Any other battery could ignite or explode. Pry the backup battery out using a screwdriver.
  • Page 62: 1090 Keyboard

    1090 Keyboard For access, remove these FRUs in order: • “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 Removal steps of keyboard Remove the screws When installing: Ensure that the screws have been fastened to secure the keyboard. Step Screw (quantity) Color...
  • Page 63 Detach the keyboard lightly in the direction shown by the arrow Chapter 7 Removing and replacing a FRU...
  • Page 64: 1100 Keyboard Bezel

    Carefully lift the keyboard until you can see how it is connected , and then detach the keyboard connector. When installing: Ensure that the keyboard connector is attached firmly. 1100 Keyboard bezel For access, remove these FRUs in order: • “1010 Battery pack”...
  • Page 65 Removal steps of keyboard bezel Remove the screws that secure the keyboard bezel. Torque Step Screw (quantity) Color M2.5 × 8 mm, flat-head, nylon-coated (10) Black 4.0 kgf-cm M2 × 3 mm, flat-head, nylon-coated (3) Silver 1.85 kgf-cm Remove the screws Torque Step Screw (quantity)
  • Page 66 Detach the connectors as shown in the following illustration. When installing: Ensure that all the connectors are attached firmly. In steps , release the keyboard bezel from the frame using a plastic pry tool as shown in the following illustration. Then remove the keyboard bezel in the direction shown by the arrow Hardware Maintenance Manual...
  • Page 67: 1110 Fingerprint Bracket And Fingerprint Board

    “1100 Keyboard bezel” on page 58 Removal steps of fingerprint bracket and fingerprint board Remove the screw , and then remove the fingerprint board as shown in the following illustration. For Lenovo V580 models For Lenovo V580c models Step Screw (quantity)
  • Page 68 “1100 Keyboard bezel” on page 58 Removal steps of LED board Peel off the mylar tape in the direction shown by the arrow For Lenovo V580 models For Lenovo V580c models Remove the LED board in the direction shown by the arrow...
  • Page 69: 1130 Touch Pad Bracket

    For Lenovo V580 models For Lenovo V580c models 1130 Touch pad bracket For access, remove these FRUs in order: • “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 • “1030 Optical drive or blank bezel” on page 47 •...
  • Page 70 Removal steps of touch pad for Lenovo V580 models Remove the touch pad cable and then push the touch pad in the direction shown by the arrow Remove the touch pad in the direction shown by the arrow Hardware Maintenance Manual...
  • Page 71: 1140 Power Board

    Removal steps of touch pad bracket for Lenovo V580c models Remove the screw and then remove the touch pad bracket in the direction shown by the arrow Torque Step Screw (quantity) Color M2 × 3 mm, flat-head, nylon-coated (1) Black 1.85 kgf-cm...
  • Page 72: 1150 Microphone Assembly

    For Lenovo V580c models Step Screw (quantity) Color Torque M2 × 3 mm, flat-head, nylon-coated (1) Black 1.85 kgf-cm 1150 Microphone assembly For access, remove these FRUs in order: • “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 •...
  • Page 73: 1160 I/O Board

    1160 I/O board For access, remove these FRUs in order: • “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 • “1030 Optical drive or blank bezel” on page 47 • “1090 Keyboard” on page 56 •...
  • Page 74: 1180 Dc-In Connector

    Removal steps of USB board Remove the screw , and detach the USB cable. Then remove the USB board in the direction shown by the arrow Step Screw (quantity) Color Torque M2 × 5 mm, flat-head, nylon-coated (1) Silver 1.85 kgf-cm 1180 DC-in connector For access, remove these FRUs in order: •...
  • Page 75: 1190 System Board Assembly

    Removal steps of DC-in connector Disconnect the DC-in connector , and remove the screw . Then remove the DC-in bracket and DC-in cable as shown in the following illustration. Torque Step Screw (quantity) Color M2 × 3 mm, flat-head, nylon-coated (1) Black 1.85 kgf-cm 1190 System board assembly...
  • Page 76 For access, remove these FRUs in order: • “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 • “1030 Optical drive or blank bezel” on page 47 • “1040 Memory modules” on page 49 • “1050 Hard disk drive assembly”...
  • Page 77 For Lenovo V580 models For Lenovo V580c models Chapter 7 Removing and replacing a FRU...
  • Page 78: 1200 Thermal Fan Assembly

    1200 Thermal fan assembly For access, remove these FRUs in order: • “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 • “1030 Optical drive or blank bezel” on page 47 • “1040 Memory modules” on page 49 •...
  • Page 79 Loosen the screws Chapter 7 Removing and replacing a FRU...
  • Page 80: 1210 Microprocessor

    Lift the thermal fan assembly in the direction shown by the arrow Attention: Be careful not to damage the connector. When installing: Before you attach the thermal fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams, on the part marked as shown in the following illustration.
  • Page 81: 1220 Lcd Unit

    • “1090 Keyboard” on page 56 • “1100 Keyboard bezel” on page 58 • “1150 Microphone assembly” on page 66 • “1190 System board assembly” on page 69 • “1200 Thermal fan assembly” on page 72 Attention: The microprocessor is extremely sensitive. When you service the microprocessor, avoid any kind of rough handling.
  • Page 82 • “1090 Keyboard” on page 56 • “1100 Keyboard bezel” on page 58 • “1150 Microphone assembly” on page 66 • “1160 I/O board” on page 67 • “1190 System board assembly” on page 69 Removal steps of LCD unit Release the antenna cables from the cable guides.
  • Page 83: 1230 Speaker Assembly And Base Cover

    Remove the LCD unit in the direction shown by the arrow 1230 Speaker assembly and base cover For access, remove these FRUs in order: • “1010 Battery pack” on page 46 • “1020 Bottom slot cover” on page 46 • “1030 Optical drive or blank bezel”...
  • Page 84 Removal steps of speaker assembly and base cover Remove the screws . Then remove the speaker assembly Step Screw (quantity) Color Torque Black M2.5 × 5.7 mm, flat-head, nylon-coated (4) 4.0 kgf-cm Hardware Maintenance Manual...
  • Page 85 Applying labels to the base cover The new base cover is shipped with a kit containing labels of several kinds. Apply those labels listed when you replace the base cover. For the labels which are not shipped with the new base cover, peel them off from the old base cover, and adhere them to the new one.
  • Page 86: 2010 Lcd Front Bezel

    2010 LCD front bezel For access, remove these FRUs in order: • “1010 Battery pack” on page 46 • “1220 LCD unit” on page 75 Removal steps of LCD front bezel Remove the screws Step Screw (quantity) Color Torque M2 × 3.5 mm, flat-head, nylon-coated (2) Black 1.85 kgf-cm Remove the LCD front bezel in the direction shown by the arrows...
  • Page 87: 2020 Integrated Camera

    2020 Integrated camera For access, remove these FRUs in order: • “1010 Battery pack” on page 46 • “1220 LCD unit” on page 75 • “2010 LCD front bezel” on page 80 Removal steps of integrated camera Remove the integrated camera from the LCD cover as shown in the following illustration. Note: The integrated camera is stuck on the top center of the LCD cover.
  • Page 88 Removal steps of LCD panel and LCD cable Remove the screws . Then remove the LCD panel in the direction shown by the arrow Step Screw (quantity) Color Torque M2 × 3.5 mm, flat-head, nylon-coated (6) Silver 1.85 kgf-cm Turn over the LCD panel in the direction shown by the arrow .
  • Page 89: 2040 Antenna Assembly And Lcd Rear Cover

    Removal steps of hinges Remove the screws , and then remove the hinges Torque Step Screw (quantity) Color M2 × 3.5 mm, flat-head, nylon-coated (4) White 1.85 kgf-cm 2040 Antenna assembly and LCD rear cover For access, remove these FRUs in order: •...
  • Page 90 Removal steps of antenna assembly and LCD rear cover Release the antenna cables from the cable guides of the LCD rear cover assembly and from the hinges in the direction shown by the arrows Cable routing: Route the antenna cables along the cable guides and secure the antenna boards with tape. As you route the cables, ensure that they are not subject to any tension.
  • Page 91: Chapter 8. Locations

    Power and battery status indicator USB connector Power button Recovery button Optical drive or blank bezel Fingerprint reader (on some models) Speaker (left) USB connector For the description of the indicators, see “Status indicators (V580)” on page 38. © Copyright Lenovo 2012...
  • Page 92 Figure 2. Lenovo V580c front view Integrated camera (on some models) Combo audio jack Wireless antennas Media card reader slot Status indicators Touch pad Speaker (right) Integrated microphone Power jack Power and battery status indicator USB connector Power button Optical drive or blank bezel...
  • Page 93: Bottom View

    Bottom view Figure 3. Bottom view Monitor connector Battery latch (manual) Battery pack RJ45 Ethernet connector Battery latch (spring-loaded) HDMI port Security keyhole USB 3.0 connectors Fan louvers Bottom slot cover The memory modules, hard disk drive, and wireless cards are located underneath the bottom slot cover. Chapter 8 Locations...
  • Page 94 Hardware Maintenance Manual...
  • Page 95: Chapter 9. Parts List

    CRUs, you can either install the CRU yourself or you can request that a Service Provider install the CRU according to the warranty service for your product. If you intend on installing the CRU, Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request.
  • Page 96 Overall for Lenovo V580 models Table 4. Parts list—Overall for Lenovo V580 models No. FRU (Overall) FRU No. See “Miscellaneous parts” on page 99 LCD unit (see “LCD FRUs” on page 96) LA58 Power Board 90000412 LA58 Upper Case 90201175...
  • Page 97 Table 4. Parts list—Overall for Lenovo V580 models (continued) No. FRU (Overall) FRU No. LA58 FingerPrint Board 90000413 LA58 USB Board 90000410 LB58 Speaker L 90200833 LB58 Speaker R 90200832 Battery, 6-cell, 2.2 Ah, 48 Wh 121500047 121500049 121500050 Battery, 6-cell, 2.8 Ah, 62 Wh...
  • Page 98 Table 4. Parts list—Overall for Lenovo V580 models (continued) No. FRU (Overall) FRU No. 16200241 mSATA solid-state drive, 16 G, LMT-16M3M Wireless LAN, non-Intel 1x1 11bgn + BT4.0 Combo 20200100 20200101 Wireless LAN, non-Intel 2x2 11abgn + BT4.0 Combo 20200098...
  • Page 99 Table 4. Parts list—Overall for Lenovo V580 models (continued) No. FRU (Overall) FRU No. Keyboard (see “Keyboard” on page 98) — ac power adapter (see “ac power adapters” on page 101) Overall for Lenovo V580c models Chapter 9 Parts list...
  • Page 100 Table 5. Parts list—Overall for Lenovo V580c models No. FRU (Overall) FRU No. See “Miscellaneous parts” on page 99 LCD unit (see “LCD FRUs” on page 96) 90000570 LA58C Power Board LB58 LED Board W/Cable 90200814 90200819 LB58 Upper Case W/TP...
  • Page 101 Table 5. Parts list—Overall for Lenovo V580c models (continued) No. FRU (Overall) FRU No. 16200092 SATA hard disk drive, 320 G, 7200 rpm 16200099 16200194 16005030 16200124 SATA hard disk drive, 500 G, 7200 rpm 16200100 16200195 LB48 Microphone 23.42384.001...
  • Page 102: Lcd Frus

    90201178 Keyboard (see “Keyboard” on page 98) — ac power adapter (see “ac power adapters” on page 101) LCD FRUs Lenovo V580 and V580c models use a 15.6-inch, high-definition (HD), light-emitting diode (LED), liquid crystal display (LCD). Hardware Maintenance Manual...
  • Page 103 Table 6. Parts list - LCD No. FRU FRU No. See “Miscellaneous parts” on page 99 LA58 LCD Bezel 90201173 LA58C LCD Bezel W/Camera Hole 90201345 LA58 Hinge L+R 90201174 LA58 Antenna R 90201177 90200517 LA48 Camera 1M LA58 LCD Cover 90201172 90201344 LA58C LCD Cover WO/Antenna...
  • Page 104: Keyboard

    Keyboard Table 7. Parts list - Keyboard (Dafon) Language FRU No. Arabic 25204266 25204356 Belgian 25204274 25204364 Brazilian Portuguese 25204267 25204357 Bulgarian 25204280 25204370 French, English 25204260 25204350 Czech, Slovak 25204279 25204369 Swedish, Finnish, Danish, Norwegian 25204273 25204363 Dutch 25204269 25204359 French 25204264...
  • Page 105: Miscellaneous Parts

    “Miscellaneous parts for Lenovo V580c models” on page 100 Miscellaneous parts for Lenovo V580 models Note: Italicized letters in parentheses are references to the exploded view in “Overall for Lenovo V580 models” on page 90. Table 8. Parts list - System miscellaneous parts FRU no.
  • Page 106 LA58 LCD Cable 90201171 Miscellaneous parts for Lenovo V580c models Note: Italicized letters in parentheses are references to the exploded view in “Overall for Lenovo V580c models” on page 93. Table 10. Parts list - System miscellaneous parts FRU no.
  • Page 107: Ac Power Adapters

    ac power adapters Table 12. Parts list—2-pin (65 W) ac power adapters FRU no. 2–pin, Eup models 36200090 36200092 36200094 2–pin, EPA models 36200143 36200144 36200210 2–pin, CS2 plug 36200289 36200291 36200293 Table 13. Parts list—2-pin (90 W) ac power adapters FRU no.
  • Page 108: Power Cords

    3–pin, CS2 plug 36200294 36200296 36200298 Power cords A Lenovo power cord for a specific country or region is usually available only in that country or region. Table 16. Parts list - 3-pin power cords (Linetek) Country or region FRU no. Argentina 145000599 •...
  • Page 109 Table 16. Parts list - 3-pin power cords (Linetek) (continued) FRU no. Country or region 145000597 Switzerland • LINETEK LS15+H03VV-F+LP-37 1 m Taiwan 145000588 • LINETEK LS15+VCTF+LP-53 1 m U.K. 145000593 • LINETEK LP-61L+ H03VV-F+ LS15 1 m U.S.A 145000594 •...
  • Page 110 Table 17. Parts list - 3-pin power cords (Longwell) (continued) FRU no. Country or region Taiwan 145000556 • Longwell LP-71+VCTF+LS-33 1 m U.K. 145000561 • Longwell LP-61L+H03VV-F+LS-18 1 m 145000562 U.S.A • Longwell LP-30B+SPT-2 18AWG+LS-18 1 m Table 18. Parts list - 3-pin power cords (Volex) FRU no.
  • Page 111 Table 18. Parts list - 3-pin power cords (Volex) (continued) FRU no. Country or region U.K. 145000605 • VOLEX MP5004+H03VV-F+VAC5S 1 m 145000537 U.S.A • Volex US15S3+SPT-2 +VAC5S 1 m Chapter 9 Parts list...
  • Page 112 Hardware Maintenance Manual...
  • Page 113: Appendix A. Notices

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
  • Page 114: Electronic Emissions Notices

    Electronic emissions notices For electronic emission information on Class B digital devices, refer to the corresponding information in the User Guide. Trademarks The following terms are trademarks of Lenovo in the United States, other countries or both: Active Protection System Lenovo OneKey Windows is a trademark of the Microsoft group of companies.

This manual is also suitable for:

V580c

Table of Contents