Table of Contents
Advertisement
5.7 Out-of-range alert
When the parent unit is out of range of the baby
unit, the parent unit beeps every 20 seconds and the
out-of-range image appears on the video display.
Note:
D
The out-of-range alert is also active when the
baby unit is turned off.
5.8 Night vision
The camera has infrared lights that allow you to
see your baby clearly, even in a dark room. When
the camera detects low light levels, the infrared
lights are turned on automatically. Place the baby
unit 1 to 1.5 meters (3.5 to 5 feet) away from the
baby to ensure a clear view.
5.9 Belt clip/stand
•
if the rechargeable battery of the parent unit
is sufficiently charged, you can take the unit
with you inside and outside the house by
attaching the unit to your belt or waistband
with the belt clip. This allows you to monitor
your baby while you are moving around.
•
To use the belt clip as a stand, turn it
downwards until the parent unit can rest on it.
12
5.10 Auto mute feature
When the baby unit detects a low sound level,
e.g. the sleeping sound of the baby, the parent unit
automatically mutes the sound output so that you
will not hear this sound. When the baby starts
to cry, the parent unit automatically turns on the
volume again to let you hear the crying sound.
5.11 Reset feature
This feature allows you to reset the settings of
parent unit. You can use this function if problems
occur that you cannot solve by following the
suggestions in chapter 'Frequently asked questions'.
Press and hold the on/off button on the
1
parent unit to turn it off.
Press and hold the volume down button
2
and simultaneously press and hold the on/off
button until a beep is heard. The parent unit
turns on again.
•
The parent unit has now been reset to
default factory settings.
5.11.1 Default settings
•
Loudspeaker volume: 3
•
Voice activation: off
•
Display brightness: 4
Advertisement
Table of Contents
