Jenn-Air SCE4320 Use And Care Manual page 41

Solid element and radiant ranges with convection
Table of Contents

Advertisement

If baked
food
is burned
or too brown
on top:
• the SELECTOR knob may be in the BROIL position.
• food may be positioned incorrectly in oven.
• oven not preheated properly.
If foods
bake
unevenly:
• the range may be installed improperly.
• check the oven rack with a level.
• stagger pans, do not allow pans to touch each other or oven wall.
• check instructions for suggested placement of pans on oven rack.
If oven
baking
results
are
less than
expected:
• the pans being used may not be of the size or material recommended for best
results.
• there may not be sufficient room around sides of the pans for proper air circulation
in the oven.
• check instructions for preheating, rack position and oven temperature.
• oven vent may have been blocked or covered.
If baking
results
differ
from
previous
oven:
• oven thermostat calibration may differ between old and new ovens. See "Oven
Temperature Knob Adjustment" on p.41.
If You Need Service
• call the dealer from whom your appliance was purchased or the authorized
Jenn-Air Service Contractor listed in the Yellow Pages. Your Jenn-Air Service
Contractor can provide better and faster service ifyou can accurately describe
problems and give model and serial number of the appliance. Be sure to retain
proof of purchase to verify warranty status. Refer to WARRANTY for further
information of owner's responsibilities for warranty service.
• Ifthe dealer or service company cannot resolve the problem, write to MAYCOR
Parts and Service Co., P.O. Box 2370, Cleveland, TN 37320-2370, 615-472-
3333
• use and care manuals, service manuals, and parts catalogs are available from
MAYCOR for a nominal charge.
All specifications subject to change by manufacturer without notice.
43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sce4340

Table of Contents