Set Your Built-In Answering System; Turn The Answering System On Or Off - VTech CS6648-2 User Manual

Telephone base control key panel:
Set your built-in answering
system
The answering system can record
and store up to 99 messages. Each
message can be up to three minutes in
length. The total storage capacity for the
announcement, messages and memos
is approximately 14 minutes. The actual
recording time depends on individual
message characteristics.
Your answering system allows you to set
your announcement, to save and delete
messages, activate call screening, to set
number of rings before pick up, to access
remotely, and to control the recording
time.
Turn the answering system on
or off
The answering system must be turned
on to answer and record messages.
When the answering system is turned
on, the /ANS ON/OFF light on the
telephone base turns on and ANS ON
displays on the handset.
To turn on or off with the
telephone base:
• Press /ANS ON/OFF
built-in answering system on or off.
When the answering system is turned
on, the base displays Ans sys on and
announces, "Calls will be answered."
When the answering system is turned
off, the base displays Ans sys off
and announces, "Calls will not be
answered."
28
to turn the