Chain Dialing; Find Handset - VTech CS6648-2 User Manual

It may be necessary to change your
telephone service to use this feature.
Contact your telephone service provide if:
• You have both caller ID and call
waiting, but as separate service (you
may need to combine these service);
• You have only caller ID service, or
only call waiting service; or
• You do not subscribe to caller ID or
call waiting services.
There are fees for caller ID services. In
addition, services may not be available in
all areas.

Chain dialing

Use this feature on the cordless
handsets to initiate a dialing sequence
from numbers stored in the directory,
caller ID log or redial list while you are on
a call.
Chain dialing can be useful if you wish
to access other numbers (such as bank
account numbers or access codes) from
the directory, caller ID log or redial list.
To access a number from the
directory while on a call:
1. Press MENU.
2. Press SELECT to choose
Directory.
3. Press or
entry.
Press SELECT to dial the displayed
4.
number.
To access a number from the
caller ID log while on a call:
1. Press MENU.
2. Press or
log, then press SELECT.
3. Press or
entry.
4. Press SELECT to dial the displayed
number.
to scroll to the desired
to scroll to Caller ID
to scroll to the desired
To access a number from the
redial list while on a call:
1. Press REDIAL to enter the redial list.
2. Press ,
browse to the desired entry.
3. Press SELECT to dial the displayed
number.
NOTE
Press CANCEL to exit the directory, caller ID
log or redial list while on a call.

Find handset

This feature helps you find misplaced
handsets.
To start paging:
• Press FIND HANDSET on the
telephone base and its screen
displays ** Paging ** . All idle handsets
ring and display ** Paging ** .
To stop paging:
• Press ,
dialing keys on the cordless handset.
-OR-
• Place the cordless handset to the
handset charger.
-OR-
• Press FIND HANDSET on the
telephone base.
NOTES
• Press MUTE to turn off the ringer of
that handset temporarily. Paging tone
continues on all other idle handsets.
• Do not press and hold FIND HANDSET
for more than four seconds. It may lead
to handset deregistration. If the handset
displays To register HS and See manual,
refer to the Add and register a handset
section to register the handset back to the
telephone base.
14
or REDIAL repeatedly to
, OFF or any of the