Returning The Multimedia Drive To Its Factory Default Settings - Seagate GoFlex Cinema User Manual

Multimedia drive

Hide thumbs Also See for GoFlex Cinema:

Quick start manual (32 pages)

Specification (2 pages)

Specfications (2 pages)

Table Of Contents

Table of Contents

Returning the Multimedia Drive to Its Factory Default

Settings

If necessary, you can return the multimedia drive to its factory default settings, listed below.

You might want to do this as a last resort if the multimedia drive isn't performing well, or if you

want to reset all your custom settings.

System Settings

Menu Language

Subtitle Text Encoding

Idle Time Before

Screen Saver

USB Imports

Destination Folder

Idle Time Before

Starting Indexing

Idle Time Before Auto

Power Off

Note:

All custom settings are lost when you return the multimedia drive to its factory default settings.

However, files stored on the multimedia drive are not deleted or affected.

You can return the multimedia drive to its factory default settings two ways:

•

From the GoFlex Cinema™ menus (see page 39)

•

Pressing the manual

(see page 40)

Returning to the Factory Default Settings from the Menus

On the Home screen, select Settings, then press OK.

Scroll right or left to find the System screen.

Select Reset to Factory Defaults, then press OK.

You are prompted to confirm. Remember that all your custom settings—including menu

language—are lost when you return the multimedia drive to its factory default settings. Stored

files are not deleted or affected.

Select Continue, then press OK.

Factory default settings are restored.

GoFlex Cinema™ Multimedia Drive User Guide