Adding More Storage Capacity To The Goflex Cinema™ Multimedia Drive; Rebooting The Multimedia Drive - Seagate GoFlex Cinema User Manual

Caution: Do not power off the multimedia drive while the firmware update is in progress.
9. When prompted, click OK to restart the multimedia drive.
Adding More Storage Capacity to the GoFlex Cinema™
Multimedia Drive
If you need additional storage capacity on GoFlex Cinema multimedia drive in the future, you
can upgrade to a new or larger-capacity GoFlex
To replace the existing GoFlex Cinema drive with a new or larger-capacity GoFlex Desk drive:
1. Disconnect the GoFlex Cinema dock from the GoFlex Cinema drive, then reconnect the dock
to the new drive, following the instructions in "Disconnecting the GoFlex Cinema™ Drive from
the GoFlex Cinema Dock" on page 35.
2. Extra rubber feet were included with the GoFlex Cinema multimedia drive (see "What's in the
Box?" on page 8). Stick them to the bottom of your new GoFlex Desk drive to ensure that the
drive remains horizontal and properly connected to the GoFlex Cinema dock.
3. Copy your media files, following the instructions in "Copying Files onto the GoFlex Cinema™
Multimedia Drive" on page 9, then continue using your multimedia drive as usual.
TIP: You can store the original GoFlex Cinema™ drive as an archive of your media files.
For more information about additional GoFlex Desk drives for your GoFlex Cinema, visit the
Seagate Web site at www.seagate.com

Rebooting the Multimedia Drive

If you are having minor problems with the multimedia drive—for instance, if the screen has
frozen—you can try refreshing it by rebooting. To reboot your multimedia drive:
1. With the multimedia drive powered on, unplug the power adapter.
2. Wait a few seconds for the multimedia drive to fully shut down, then plug in the power
adapter.
The multimedia drive restarts.
GoFlex Cinema™ Multimedia Drive User Guide
Adding More Storage Capacity to the GoFlex Cinema™ Multimedia Drive
®
Desk drive.
38