Seagate GoFlex Cinema User Manual page 40

Returning to the Factory Default Settings Manually
1. Find the
FACTORY DEFAULT
The
FACTORY DEFAULT
help locating the
FACTORY DEFAULT
Using the end of a paperclip, press and hold the
Factory default settings are restored.
Note: If you hold the
on the multimedia drive toggles among PAL, NTSC and HDMI. See "Setting the Multimedia
Drive for TVs in Other Countries" on page 45 for more information.
If you accidentally change the multimedia drive's TV System setting, press and hold the
FACTORY DEFAULT
GoFlex Cinema™ Multimedia Drive User Guide
Returning the Multimedia Drive to Its Factory Default Settings
button on the multimedia drive.
button is on the left beside the USB ports. See Figure 1 on page 6 for
button.
button for longer than 10 seconds, the TV System setting
FACTORY DEFAULT
button again for more than 10 seconds to change it back.
button for 5–8 seconds.
FACTORY DEFAULT
40