Table of Contents
Advertisement
M
aintenance and care
disposal of batteries continued
4.
Separate left and right cover.
5.
Remove the entire battery assembly from
the cover.
6.
Remove (3) Phillips head screws between
the motor and battery bracket.
7.
Pull the motor, PCB, fuse, and inner wire
through the middle of the battery bracket,
separating the battery bracket and single
battery from the motor, PCB, and inner wire.
8.
Cut wires from the PCB and fuse to the
battery bracket.
9.
Keep Battery Pack together – DO NOT
separate individual batteries. For specific
disposal instructions of batteries, please
contact RBRC (Rechargeable Battery
Recycling Corporation) 1-800-822-8837
or visit www.rbrc.com.
10.
Discard remainder of product
caution: Disconnecting the battery will
destroy the appliance and void the war-
ranty.
T
roubleshooting
Vacuum won't turn on
Possible causes
1.
Battery isn't fully charged
brush roll not turning
Possible causes
1.
Brush roll is jammed
2.
Brush roll needs to be reset
3.
Broken brush roll belt
Vacuum cleaner has low suction
Possible causes
1.
Dirt container is full
2.
Dirt container is not installed properly
3.
Foot is loose
4.
Filters need cleaning
5.
Filters need replacing
w w w . b i s s e l l . c o m
Remedies
1. Charge battery. Follow charging battery instructions on page 5
Remedies
1. Remove obstruction. Follow instructions on pages 7 and 8
2. Follow instructions on page 8
3. Follow instructions on page 8
Remedies
1. Empty dirt container. Follow instructions on page 6
2. Position container correctly and snap firmly into place
3. Make sure foot is fully inserted into body of unit
4. Follow filter instructions on page 7
5. Visit www.bissell.com or call 1-800-237-7691 to order
replacement filters.
8 0 0 . 2 3 7 . 7 6 9 1
Meijer.com
9
Advertisement
Table of Contents
