Single Line Telephone Access - NEC Xen Alpha Features And Specifications Manual

S-2

Single Line Telephone Access

Xen Alpha
F Single line telephones can be connected to the system. These telephones can be used to
EATURE
D make external calls, internal calls and paging calls.
ESCRIPTION
S To provide this feature, an SLI(2)-B13 ETU and PBR-B13 ETU must be installed in the KSU.
TATION
A
PPLICATION
O
PERATING
P
ROCEDURES
Originating an internal call when the outgoing call priority mode is set to seize an internal line:
1.
2.
3.
Originating an internal call when the outgoing call priority mode is set to seize an external line:
1.
2.
3.
4.
Originating an external call when the outgoing call priority mode is set to seize an external line:
1.
2.
3.
Originating an external call when the outgoing call priority mode is set to seize an internal line:
1.
2.
3.
4.
Answering calls:
1.
Features & Specifications, Single Line Telephone Access
A6-506000-642-02
Lift the handset.
Dial the desired extension number.
Talk when the called party answers.
Lift the handset.
Press hookflash.
Dial the desired extension number.
Talk when the called party answers.
Lift the handset.
Dial the desired telephone number.
Talk when the called party answers.
Lift the handset.
Dial the access code to access a trunk (default: 0) or feature access code
(X = Trunk Number 1 → 6)
Dial the desired telephone number.
Talk when the called party answers.
Lift the handset and talk with the calling party.
Release 1.0
F C
X.
S-2, Page 197