Advertisement
Technical specifications
Input level for 85 dB SPL @ 1 m, @ 0 dB setting,
unbalanced
Max input level (@setting)
Power consumption
Amplifier power
Max SPL 1 m, normal room, short term IEC signal
Frequency Response (+/- 3 dB)
Resonance Frequency
Internal Cabinet Volume
Bass Principle
Weight
Dimensions (Depth x Width x Height)
Crossover
Crossover Frequencies
Crossover Slope
Connection
Recommended Placing
Remarks
Tweeter
Woofer
Cabinet
Crossover
Amplifier
Due to continuous development, these specifications are subject to change without notice.
Owner's manual
80 mVrms
4,8 Vrms (-10 dB)
1,5 Vrms (0 dB)
1 Vrms (+4 dB)
Standby: 0.3 W
Idle: 5.8 W
Max: 94 W
Tweeter: 50 W
Woofer: 50 W
118 dB peak
42 Hz to 24 kHz
45 Hz
9.5 liters
Bass reflex
7.7 kg
296 x 186 x 320 mm
2 way
1900 Hz
12 dB/oct
XLR balanced and RCA unbalanced
Desktop
D-281 – 28 mm soft dome, rear chamber, magnetic fluid
4 mm aluminum front
Pure aluminum wire voice coil
180 mm molded aluminum frame
One piece thermo formed MSP cone
75 mm voice coil with pure aluminum wire on aluminum
former.
Designed to be placed on a desk.
18 mm MDF
Active, DSP based
Input sensitivity selector
HF, MF and LF trim selector
High pass frequency selector
Auto standby/On selector
Optional remote volume control (cabled)
High efficiency digital power amplifiers.
Switch mode power supply with wide range input
Technical specifications
9
Advertisement
