Download Print this page

Dynaudio BM5 mkIII Owner's Manual page 3

Active monitor system
Hide thumbs Also See for BM5 mkIII:

Advertisement

Introduction
Important safety instructions
The lightning flash with an arrow-
head symbol within an equilateral
triangle, is intended to alert the user
to the presence of uninsulated "dan-
gerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of im-
portant operating and maintenance
(servicing) instructions in the litera-
ture accompanying the product.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Install in accordance with the manufac-
turer's instructions.
8. Do not install near any heat sourc-
es such as radiators, heat registers,
stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or the
third prong are provided for your safe-
ty. If the provided plug does not fit into
Owner's manual
your outlet, consult an electrician for re-
placement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and
the point where they exit from the ap-
paratus.
11. Only use attachments/accessories spe-
cified by the manufacturer.
12. Use only with the cart, stand, tri-
pod, bracket, or table specified
by the manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/appara-
tus combination to avoid injury from tip-
over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
1 4. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in
any way, such as power-supply cord
or plug is damaged, liquid has been
spilled or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
Warning!
– To reduce the risk of fire or electrical
shock, do not expose this equipment to
dripping or splashing and ensure that
no objects filled with liquids, such as
vases, are placed on the equipment.
– This apparatus must be earthed.
– Use a three wire grounding type line
cord like the one supplied with the prod-
uct.
Introduction
1

Advertisement

loading