Technical Specifications - Dynaudio DBM50 User Manual

Input level for 85 dB SPL @ 1m, @ 0 dB setting, unbalanced:
Max input level (@setting):
Power consumption:
Amplifier power:
Max SPL 1m, normal room, short term IEC signal:
Frequency Response: (+/- 3dB):
Resonance Frequency:
Internal Cabinet Volume:
Bass Principle:
Weight:
Dimensions (W x H x L):
Crossover:
Crossover Frequencies:
Crossover Slope:
Connection:
Recommended Placing:
Remarks
Tweeter:
Woofer:
Cabinet:
Crossover: Active, DSP based
Amplifier:
DBM50_prelim_2402_2012.indd 9

TECHNICAL SPECIFICATIONS

D-281 - 28 mm soft dome, rear chamber, magnetic fluid
4mm aluminium front
Pure aluminium wire voice coil
18cm moulded aluminium frame
One piece thermo formed MSP cone
75 mm voice coil with pure aluminium wire on kapton former.
Designed to be placed on a desk.
Angular cabinet design to reduce internal standing sound waves.
18 mm MDF
Input sensitivity selector
HF, MF and LF trim selector
High pass frequency selector
Auto standby/On selector
Remote volume control (cabled)
High efficiency digital power amplifiers.
Switch mode power supply with wide range input
D
ue to continuous Development
subject to change without notice
80 mVrms
4,8 Vrms (-10dB)
1,5 Vrms (0dB)
1 Vrms (+4dB)
Standby: 0.3 W
Idle: 5.8 W
Max: 94 W
Tweeter: 50 W
Woofer: 50 W
117 dB peak
46 Hz – 21 kHz
39 Hz
13.9 litres
Bass reflex
7.2 kg
230 x 335 x 348 mm
2 way
1500 Hz
12 dB/oct
XLR balanced and
RCA unbalanced
Desktop
,
these specifications are
.
9
15-03-2012 14:36:15