Making The Settings For Using Dr.picza3 - Roland Picza LPX-1200 User Manual

Making the Settings for Using Dr.PICZA3

You use the included Dr. PICZA3 program to make the settings that let you perform scanning with the machine.
1 Start Dr.PICZA3.
From the [Start] menu, choose [All programs (or Programs)], then [Roland Dr.PICZA3], then [Dr.PICZA3].
Go to the [File] menu and click [Preferences].
2
Make the setting for the communication port and the unit of measurement to use with Dr. PICZA3.
3
This completes all the preparations you need to make to perform scanning using the machine.
1-3 Installing and Setting Up the Software
Click this after you complete
making the setting.
Choose the number of the port
labeled "(Roland LPX-1200 USB
Port)."
Set [Units] to either [mm] or [inch].
1. Preparing the Machine
25