Let's Try Editing Data With 3D Editor - Roland Picza LPX-1200 User Manual

Let's Try Editing Data with 3D Editor

Let's try some simple editing. We'll scan an apple with the machine, then try cutting and moving it. The explanations in
this section begin at the point where you have scanned an apple using Dr. PICZA3.
Procedure
Start 3D Editor.
1
Click the [Run 3D Editor] button.
Dr.PICZA3 Window
Try cutting the apple vertically. First, do the preparation.
2
Click the [Cut at Plane] button.
3-3 Basic Operations for Objects
3D Editor starts.
The scanning data for the apple is imported
at the same time.
The cut surface and a dialog box appear.
Cut
surface
Dialog box
3. Editing Scanning Results
47