When the window shown in the figure appears,
5
select [No, not this time], then click [Next].
If the window in step 6 appears instead of this
window, continue with installation and setup.
6
Select [Install the software automatically], then
click [Next].
When this dialog box appears, click [Continue
7
Anyway].
Installation starts automatically.
Click [Finish].
8
The [Welcome to the Found New Hardware Wizard] dia-
log box appears.
9
Carry out steps 5 through 8 again.
This completes the installation of the driver.
1-3 Installing and Setting Up the Software
1. Preparing the Machine
17