Table of Contents
Advertisement
2-4 Finishing the Data
Procedure
You perform rescanning using the following procedure. The screens shown are those for plane rescanning.
1
First, scan the entire object.
Choose a scanning mode according to the shape of the
scan object.
From this point on, never open the door until
rescanning ends. Doing so switches off the power.
Scanning cannot be resumed when you then switch
on the power again.
You can speed up operations during basic scanning by
scanning at a coarse pitch. For line scanning and point
scanning in particular, it is a good idea to scan at the mini-
mum pitch necessary to get the general shape.
When the scan of the entire object finished, click
2
the [
] button to choose the method you want
to use for rescanning.
Drag to specify the rescanning area.
3
You can specify more than one rescanning area.
Shortcut Keys for Shifting the Perspective
• To Rotate the Object
Hold down the SPACE key and drag
• To Move the Object
Hold down the Ctrl key and drag
• To expand and reduce the Object
Hold down the shift key and drag
In addition to these shortcuts, you can also shift the per-
spective using the arrow keys. For detailed information,
refer to the online help for Dr.PICZA3.
2. Creating 3D Data
38
SPACE key + drag left or right to shift
the perspective.
Drag to specify the
rescanning area.
Advertisement
Table of Contents
