Making The Settings For Using Dr.picza3 - Roland Picza LPX-600 User Manual

Making the Settings for Using Dr.PICZA3

You use the included Dr. PICZA3 program to make the settings that let you perform scanning with the machine.
Procedure



This completes all the preparations you need to make to perform scanning using the machine.
Go to the [File] menu and click [Preferences].
2-4 Installing and Setting Up the Software
Start Dr.PICZA3.
From the [Start] menu, choose [All programs (or Pro-
grams)], then [Roland Dr.PICZA3], then [Dr.PICZA3].
Make the setting for the communication port
and the unit of measurement to use with Dr.
PICZA3.
Click [OK] after you complete making
the setting.
Choose the number of the port labeled
"Roland LPX-600 USB Port."
Set [Unit] to either [mm] or [inch].
2. Preparing the Machine 27