Table of Contents
Advertisement
OPTIONAL CONTROLS
Primer Bulb (911150, 151, 152, 153)
Push the primer bulb in to add fuel for easier
engine start.
Wheel Drive Control (self-propelled
models)
CAUTION: Unit will move forward
at engine start if wheel drive
control is engaged. ALWAYS
release wheel drive control before
starting unit.
NOTE: Engine must be running for wheel
drive to propel unit.
911152, 153, 154
To drive forward:
Slowly squeeze the wheel drive control
toward the handlebar until you reach a
comfortable ground speed. Hold the wheel
drive control against the handlebar for full
speed.
To stop:
Release wheel drive control.
STOP
GO
GO
Figure 8
Speed Limiter (911152, 153, 154)
The speed limiter increases or decreases
tension in the drive cable, which limits the
unit's forward speed.
In the operator's position, turn the speed
limiter to the left to increase maximum
forward speed. Turn the speed limiter to the
right to decrease maximum forward speed.
Fuel Shutoff Valve (911154)
IMPORTANT: The fuel shutoff valve MUST
be in the closed position prior to transporting
the unit.
Open the fuel shutoff valve to operate the
unit. Close the fuel shutoff valve when
storing, transporting or servicing the unit.
Choke Control (911154)
Move choke lever to the choke position to
start a cold engine.
NOTE: The choke will slowly open as the
engine warms.
OM1245
GB - 13
Figure 9
Fuel shutoff valve closed.
Fuel shutoff valve open.
Advertisement
Table of Contents
