Ultra-Small Form Factor Computer
Setting Up Your Computer
CAUTION:
Product Information Guide.
NOTICE:
appropriate cable to the card, not to the connector on the back panel.
NOTICE:
place the computer too close to a wall or other storage compartment that might prevent air circulation
around the chassis.
You must complete all the steps to properly set up your computer. See the appropriate figures
that follow the instructions.
1 Connect the keyboard and mouse.
NOTICE:
30
Quick Reference Guide
1
5
1
heat sink assembly
speaker (optional)
2
memory modules (2)
3
Before performing any of the procedures in this section, follow the safety instructions in
If your computer has an expansion card installed (such as a modem card), connect the
To help allow the computer to maintain proper operating temperature, ensure that you do not
Do not attempt to operate a PS/2 mouse and a USB mouse simultaneously.
2
4
4
hard drive
chassis intrusion switch
5
3