Basic Operation; Telephone Operation; Handset Operation - VTech ia5829 User Manual

Telephone Operation

Handset Operation

/ CID
• While on a call, press to
decrease the volume. A
double beep will sound
when you reach the mini-
mum setting.
• While phone is not in use,
press to display caller ID
information.
• While entering number or
letters, press to delete last
character entered.
(phone) / FLASH
• To make a call, press then
dial the number. or dial the
number (use < to back-
space and correct digits),
then press (phone)/
FLASH.
• During a call, press to re-
ceive an incoming call, if
call waiting is activated.
• To answer a call, press
this or any key except
(off).
HOLD
• Press to put a call on hold.
• To release hold, press it
again or press phone or
lift the handset of an ex-
tension.
CHAN/ DELETE
• Press to switch to a clear
channel while on a call.
• When viewing the all log,
press to delete the cur-
rent record displayed.
• Press and hold to delete
all calls log while handset
is idle.
• Use SELECT in conjunction
with PROG during handset
programming.
• While on a call, press to in-
crease the volume. A double
beep will sound when you
reach the maximum setting.
• While phone is not in use,
press to display phonebook
entries.
• While entering letters, press
to advance cursor.
• To end a call, press this key
or place handset in base.
• While programming, press
• While paging, press
cancel.
• To call last number dialed,
press REDIAL/PAUSE, then
press
-OR-
• Press
then press REDIAL/PAUSE.
• To delete the last number di-
aled record, press twice
while handset is idle.
• While entering numbers,
press REDIAL/ PAUSE to in-
sert a dialing pause.
• Press to enter programming
mode with handset idle (on
hook).
9
SELECT
/
(off)
to exit.
REDIAL/PAUSE
(phone)/FLASH
(phone)/FLASH
PROG
to