Attaching The Embroidery Foot - Brother 885-V95 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY

Attaching the Embroidery Foot

This section describes how to attach the embroidery foot "Q".

Attaching the embroidery foot

Attach the embroidery foot "Q" when embroidering.
Have the included embroidery foot "Q" and a
screwdriver ready.
b
a Embroidery foot bar
b Caught by the presser foot holder screw
CAUTION
● Always use the embroidery foot "Q" when
embroidering. If the wrong presser foot is
used, the needle may hit the presser foot
and bend or break.
a Press (Needle position button) once or
twice to raise the needle.
a Needle position button
Note
z The needle is correctly raised when the mark
on the handwheel is at the top. Check the
handwheel mark is at the top position.
138
a
a
b b
Turn off the sewing machine.
CAUTION
z
Before attaching the embroidery foot, be
sure to turn off the sewing machine.
Otherwise, injuries may occur if one of
the operation buttons is accidentally
pressed and the machine starts sewing.
c Raise the presser foot lever.
a Presser foot lever
X
The presser foot is raised.
d Press and hold the black button on the back of
the presser foot holder to detach the presser
foot.
a
b
a Black button
b Presser foot holder
X
The presser foot holder releases the presser
foot.
a