Changing The Length For Satin Stitches; Adjusting The Character Spacing - Brother 885-V95 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES
Changing the length for satin
stitches
The length for one satin stitch can be changed in five
gradations.
a Press (Utility stitch key) on the
operation panel, and then select
stitch).
b Select a satin stitch pattern.
c Press .
X
It turns to and the pattern becomes
longer.
Each time you press it, the number changes.
You can select from
124
(Satin
- .

Adjusting the character spacing

The space between alphanumeric characters can be
adjusted.
a Press (Utility stitch key) on the
operation panel, and then select characters.
b Press (Setting key).
c Press for character spacing.
Press to increase the character spacing.
Press to decrease the character spacing.
Memo
z The default setting is "00". The number less
than "00" cannot be set.
z The result of adjusting the character spacing
is valid for all characters. The result is valid
not only while entering characters, but also
before and after entering characters.