Changing The Stitch Density; Changing The Pattern Size - Brother 885-V95 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Changing the stitch density

If a decorative satin stitch has been selected, the
stitch density can be changed.
a Press
operation panel, and select
satin stitch).
b Select a decorative satin stitch pattern.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 51).
c Press
selected.
Select
for compact stitching.
CAUTION
● If the stitching density is too compacted,
depending on the needle, the stitches may
be bunched together, causing the needle
to break.
(Utility stitch key) on the
(Decorative
until the desired stitch density is
for sparse stitching, or select

Changing the pattern size

The size of character stitches in the Gothic font and
outline style can be switched between large and
small. However, the size of other patterns cannot be
changed.
a Select a stitch.
• For details on selecting a stitch, refer to
"Selecting stitching" (page 51).
b Press until the desired size is selected.
a
c Repeat steps
Memo
z The large pattern size is the default. If the
small pattern size is selected, small patterns
can be combined and connected.
z If multiple patterns have been combined, the
size of each selected pattern can be
specified.
Sewing the Various Built-in Decorative Patterns 123
b
and .
3