Zotac ZBOX nano VDO1 User Manual page 21

ZOTAC ZBOX nano
6
7
8
9
Connect the supplied AC adapter to the DC IN jack on the system rear panel and
then press the power switch on the front panel to turn on the system.
Connect one end of an HDMI cable to the HDMI port on the system rear panel
by default.)
Connect one end of a network cable to the LAN port on the system rear panel and
the other end to a network hub, switch or router.
Connect one end of an eSATA device to the eSATA port.
to conserve power.