Troubleshooting - Lorex LW1012 Instruction Manual

Color wireless surveillance system with indoor / outdoor night vision cameras
Hide thumbs Also See for LW1012:
Table of Contents

Advertisement

Troubleshooting

Troubleshooting
If you have problems with your System, there is often a quick and simple solution. Please try the
following:
Problem
There is no picture from a
Camera.
There is Interference with
the Camera Picture.
There are problems with
the Audio.
12
Solution
Check all connections to the Camera. Make sure
the adaptor is plugged in.
Make sure that the Cameras and Receiver are
both ON.
Make sure that the receiver is set to search for the
Camera (using the DIP Switch settings).
Make sure that the camera is in range of the
Receiver.
If using the battery adaptor, try replacing the 9V
Battery
Make sure that each camera (transmitter) is within
range, and that there are no large obstructions or
interference (i.e. older cordless phones on the
900MHz Frequency).
Try repositioning the camera, receiver or both to
improve the reception.
Ensure that the volume on the TV is ON
Make sure that the sound is occurring within
range of the Camera Microphone
If the unit emits a loud screeching noise
(feedback), move the camera or receiver farther
apart.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lw1010

Table of Contents