Replacing The Display Assembly; Removing The Display Bezel - Dell Inspiron 15R Owner's Manual

Replacing the Display Assembly

Procedure
Place the display assembly in position and replace the screws that secure the
1
display assembly to the computer base.
Route the display cable through the routing guides and connect the display cable
2
to the connector on the system board.
Adhere the tape that secures the display cable to the system board.
3
Connect the antenna cables to the connectors on the Mini-Card.
4
Postrequisites
Replace the palm rest. See "Replacing the Palm Rest" on page 31.
1
Replace the base cover. See "Replacing the Base Cover" on page 18.
2
Replace the keyboard. See "Replacing the Keyboard" on page 16.
3
Replace the battery. See "Replacing the Battery" on page 13.
4
Follow the instructions in "After Working Inside Your Computer" on page 9.
5

Removing the Display Bezel

Prerequisites
Remove the battery. See "Removing the Battery" on page 13.
1
Remove the keyboard. See "Removing the Keyboard" on page 15.
2
Remove the base cover. See "Removing the Base Cover" on page 17.
3
Remove the palm rest. See "Removing the Palm Rest" on page 27.
4
Remove the display assembly. See "Removing the Display Assembly" on page 35.
5
Display Assembly
37
|