Entering The Service Tag In The Bios - Dell Inspiron 15R Owner's Manual

Slide the Media Card Reader cable into the connector on the system board and
6
press down on the connector latch to secure the cable.
7 Connect the display cable to the connector on the system board and adhere the
tape that secures the cable to the system board.
Connect the power-adapter port cable, fan cable, and speakers cable to the
8
connectors on the system board.
Align the screw holes on the power-adapter port bracket with the screw holes on
9
the computer base.
Replace the screws that secure the power-adapter port bracket to the computer
10
base.
Postrequisites
Replace the palm rest. See "Replacing the Palm Rest" on page 31.
1
Replace the keyboard. See "Replacing the Keyboard" on page 16.
2
Follow the instructions from step 4 to step 5 in "Replacing the Optical Drive" on
3
page 26.
Follow the instructions from step 4 to step 6 in "Replacing the Hard Drive" on
4
page 23.
Replace the memory module(s). See "Replacing the Memory Module(s)" on
5
page 20.
Replace the base cover. See "Replacing the Base Cover" on page 18.
6
7 Replace the battery. See "Replacing the Battery" on page 13.
Follow the instructions in "After Working Inside Your Computer" on page 9.
8

Entering the Service Tag in the BIOS

Turn on the computer.
1
2 Press <F2> during POST to enter the system setup program.
Navigate to the main tab and enter the Service Tag in the Service Tag Setting field.
3
System Board
53
|