Adding A Stop To Your Route Using The Map; Deleting A Stop From Your Route; Reordering Stops On A Route - TomTom GO Reference Manual

2. Select Add Stop to Route.
The map view is shown.
3. To select a stop, do one of the following steps:

Zoom in on the map, then press and hold to select a location. In the pop-up menu, select Add
to Current Route.

Press the Search button and search for a location. When you have found a location, select
Add Stop to Route.
Your route is recalculated to include your stop.

Adding a stop to your route using the map

1. Press the switch view button
Your complete route is shown on the map.
2. Zoom in on the map, then press and hold to select a location.
3. Select the pop-up menu button.
4. Select Add to Current Route.
Your route is recalculated to include your stop.

Deleting a stop from your route

1. Press the switch view button
Your complete route is shown on the map.
2. In the route bar, press the stop you want to delete.
The map zooms in to the stop and shows a pop-up menu.
Tip: If you select the wrong stop, press the back button to return to the map.
3. Select Delete This Stop.
The stop is deleted and your route is recalculated.

Reordering stops on a route

Note: If you have a route with no stops, you can use this button to reverse the route.
1. In the Main Menu, select Current Route.
2. Select Reorder Stops.
The map view is shown with the route cleared. The starting point, destination and all the stops are
shown in black with a cross which means that they can be changed.
3. Select the starting point.
The symbol changes to a starting point arrow.
4. Select the stops one by one in the order you wish to drive them.
The symbols change to a flag as you select each stop.
5. Select your destination.
Your route is recalculated with the stops in the changed order.
to show the map.
to show the map.
54