Preparing For Use After Storage - KTM 1190 Adventure EU Owner's Manual

21 STORAGE
21.2

Preparing for use after storage

Info
Do not use non-porous materials since they prevent humidity from escaping,
thus causing corrosion.
Avoid running the engine for a short time only. Since the engine cannot warm
up properly, the water vapor produced during combustion condenses and causes
valves and the exhaust system to rust.
(Option: Center stand)
–
Remove the vehicle from the center stand. (
–
Recharge the battery.
–
Install the battery.
Info
If the battery was disconnected, the time and date must be set.
–
Perform checks and maintenance measures when preparing for use. (
401059-01
–
Take a test ride.
x ( p. 153)
x ( p. 151)
p. 98)
p. 75)
192