KTM 1190 Adventure EU Owner's Manual page 110

13 SERVICE WORK ON THE CHASSIS
–
Check the chain sliding guard for wear at the cutout.
»
If rivet
chain sliding guard:
–
Change the chain sliding guard.
–
Check the chain sliding guard for tightness.
» If the chain sliding guard is loose:
–
Tighten the chain sliding guard.
Guideline
Screw, chain sliding guard
S00348-10
–
Check the chain guide for wear.
» If the chain guide is worn:
–
Change the chain guide.
–
Check the chain guide for tightness.
» If the chain guide is loose:
–
Tighten the chain guide.
401670-01
1
of the chain is no longer visible at the lower edge
x
C
x
M5
108
of the recess of the
5 Nm (3.7 lbf ft)