Installing The Airflow Guide (Z400 Only) - HP Z Workstation series User Manual
Hide thumbs
Also See for Z Workstation series:
- Safety and regulatory information manual (32 pages) ,
- User manual (59 pages)
Table of Contents
Advertisement
Installing the airflow guide (Z400 only)
1.
Follow the procedures described in
the workstation for component installation.
2.
Press the power cables, including P1, down toward the system board between the DIMM slots
and the internal bay, as shown in the following figure.
Figure 7-3
3.
Set the airflow guide into the chassis.
a.
Place the edge of the airflow guide (1) between DIMM socket #6 and the CPU heatsink.
Figure 7-4
b.
Route the power and data cables through the opening next to the internal bay (2).
50
Chapter 7 Installing memory
Positioning the chassis cables
Installing the airflow guide
Preparing for component installation on page 43
to prepare
ENWW
Advertisement
Table of Contents
