HP Compaq 8100 Elite Hardware Reference Manual page 24

●
18 Hardware Upgrades
If you are removing a media card reader, disconnect the USB cable from the system board.
If the media card reader has a 1394 port, disconnect the 1394 cable from the PCI card.
NOTE: Your computer may look different than the illustrations shown below. On the Z200
Workstation, see the service label on the access panel for the location of USB ports.
Figure 15 Disconnecting the Media Card Reader USB Cable
Figure 16 Disconnecting the Media Card Reader 1394 Cable
NOTE: The Z200 Workstation has a standard front 1394 IO port and cable. If you install a
1394 card, attach the cable (clipped to the bottom of the chassis) to the 1394 card.
ENWW