HP Compaq 8100 Elite Hardware Reference Manual page 19

Convertible minitower business pc and convertible minitower workstation

Hide thumbs Also See for Compaq 8100 Elite:

Table of Contents

Before installing an expansion card, remove the expansion slot cover or the existing expansion

card.

If you are installing an expansion card in a vacant socket, remove the appropriate expansion

slot cover on the back of the chassis. Lift the expansion slot cover from the expansion slot.

Figure 9

If you are removing a standard PCI card or PCI Express x1 card, hold the card at each end

and carefully rock it back and forth until the connectors pull free from the socket. Lift the card

straight up to remove it. Be sure not to scrape the card against other components.

NOTE:

attached to the expansion card.

Figure 10

ENWW

Removing an Expansion Slot Cover

Before removing an installed expansion card, disconnect any cables that may be

Removing a Standard PCI Expansion Card

Removing or Installing an Expansion Card

Table of Contents

Show Quick Links

Table of Contents