Configuring Poe System Settings - D-Link DGS-3100 SERIES User Manual

Configuring PoE System Settings

The PoE System Setting Page contains port utilization information for specific ports. To view port statistics:
1. Click PoE > PoE System Setting. The PoE System Setting Page opens:
The PoE System Setting Page contains the following fields:
Fields
Unit
System Power Threshold
Disconnect Method
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Figure 0-2 PoE System Setting Page
Description
Defines the unit number.
Indicates the power in Watts consumed before an alarm is generated. The possible field
values are:
50W — Indicates 50 watts.
100W — Indicates 100 watts.
170W — Indicates 170 watts.
Defines the method used to deny power to a port once the threshold is reached. The
possible fields are:
Deny next port —Denies power to the next port that makes a PoE request after the
threshold has been reached. This is the default value.
Deny Low priority port—Denies power to the lowest-priority port after the threshold
has been reached.
200